This Glass bubbler Attachment fits the Lookah Unicorn Mini E-Rig and Seahorse X. This glass attachment is made from borosilicate glass; the inner middle cone is clear and not frosted like the original and features 2 holes at the bottom for diffusion.
The holes should be about 1 centimeter beneath the water level to allow for optimal filtration of your hits, however there is a max fill line printed onto the glass so that you are aware of how much water the Unicorn Mini glass can handle.
As you inhale into the Lookah Unicorn Mini Glass you will see your vapors travel up the central shaft inside the inner dome before filtering through the water as it passes through the 2 percolation holes. Your cooled off vapor will then come together as it travels up inside the outer cone delivering super smooth, yet massive rips.
How to Connect the Glass Bubbler to Your Unicorn Mini?
When connecting the glass to the Unicorn Mini Electric Dab Rig line up the hole located around the edge of the base of the attachment with the indented groove located at the magnetic top of the Lookah Unicorn Mini ERig. This allows for maximum airflow.
To reduce the airflow, you can twist the glass so that the hole on the glass attachment is not aligned with the indented groove on the magnetic top of the e-rig.
How to Clean the Glass Bubbler?
This Lookah Mini Unicorn Glass Attachment can be cleaned with isopropyl alcohol and coarse salt. Or you can just use a cleaning solution.
Step 1: Pour a small quantity of either solution through the top of the glass cone.
Step 2: Cover the holes on the base of the cone and the mouthpiece.
Step 3: Shake well for a few minutes to remove any dirt or residue. After, rinse thoroughly to ensure no solution remains on the glass.
Tech Specs:
Build Material: Borosilicate Glass
Compatibility: Fit Unicorn mini and Seahorse X
Package Contains:
1 x Unicorn Mini glass bubbler
1x Silicone Mouthpiece Tip Stopper
