Images
Description for Lookah Seahorse Coil Ⅲ - Ceramic Tube 510 Thread Coil
Lookah Seahorse Coil Ⅲ - Ceramic Tube 510 Thread Coil - Pack of 3 Coils
The Seahorse Coil Ⅲ is for the following devices only:
Lookah Seahorse Max
Lookah Seahorse 2.0
Lookah Seahorse Pro Plus
Lookah Seahorse X.
The coil will NOT work on the first-generation Seahorse or Seahorse Pro dab pens.
The 510 thread coils have a ceramic tube-like honey staw which has a more contact surface and a larger airway creating voluminous clouds of vapor.
Ideal for cloud chases and those wanting big rips the Seahorse Coil Ⅲ brings greater vapor than the other quartz or ceramic Seahorse coils.
**To ensure the quartz tip lasts as long as possible, make sure you fully burn all the concentrates off the tip after each dab. If you leave concentrates on the tip or inside the airways it will harden and possibly ruin or wear out the coil prematurely. **
**Don't clean the quartz or ceramic tip with the cleaning brush or any liquids/solvents, as this can damage the tip.**
**Do not dip the coils into the concentrate. This will cause oversaturating of the coil, clogging the coils, and decreasing the vaporization rate. It is recommended to slightly touch the edge of the tip on the coil to the concentrates, not dipping it into the concentrate.**
When using this Seahorse coil, heat it a little first so it reaches a good temperature. It is best to angle the tip at a 45-degree angle when bringing it into contact with your chosen wax concentrate. As the hot tip melts your concentrate inhales steadily for a luscious lung full of tasty vapor to heighten your senses.
0.6 Ω Resistance.
Each pack contains 3 coils.